News

Wavelength division multiplexing (WDM) allows two or more wavelengths OF light to BE TRANSMITTED over DIFFERENT optical channels simultaneously in the same fiber. WDM (Wavelength Division Multiplexing) is two or more different wavelengths of optical carrier signals (carrying a variety of information

SC type fiber jumper (SC = Subscriber Cable). The joint is a standard square joint, using engineering plastics, with high temperature resistance, not easy to oxidation advantages. Generally, SC connector is used for the side optical interface of transmission equipment. Often used in general network,

What are the types of fiber adapters?Fiber optic adapter (flange), also known as fiber optic connector, is a fiber optic active connector pair of connecting components. Common ones are: SC, LC, ST, FC, ST, etc.

Application of Fiber array (FA)?With the development of ultra-high speed and integration of optical communication, optical transceiver module also wants to adopt smaller volume and higher integration scheme, and the demand for parallel high-speed optical components is increasing rapidly. FA fiber ar

What is Fiber Array (FA)?Fiber Array (FA) is an array composed of a bundle of fibers or a fiber strip installed on a V-Groove substrate at specified intervals. Optical fiber arrays in optical communication mainly include substrate, platen, and fiber. Usually, multiple grooves are cut out at the base

The tail fiber (also known as tail line, pig tail line). One end of it has a connecting head, and the other end is a broken end of a fiber optic cable core, which is welded with other fiber optic cable core to complete the connection. In other words, cut a jumper in half from the center, and you hav

Regarding the problem of fiber signal attenuation, it is mainly divided into two aspects: intrinsic attenuation and extrinsic attenuation. The intrinsic attenuation is determined by the material made of the fiber, while the extrinsic attenuation is closely related to the construction process. So in

How to classify fiber jumper? Optical fiber jumper is used to connect the device to the optical fiber wiring link. With a thick protective layer, it is generally used in the connection between the optical end machine and the terminal box.1Optical fiber jumper (also known as optical fiber connector)

Taper optical splitter Coupler with PLC planar waveguide optical splitterOptical splitter, also known as optical splitter, is one of the important passive devices in optical fiber links, with multiple input and multiple output optical fiber junction devices. Optical splitters can be divided into FBT

Fiber adapter, is the fiber active connector pair connecting parts. The fiber adapter can precisely dock the two end faces of the fiber, so that the light energy output of the transmitting fiber can be maximally coupled to the receiving fiber, and the docking of the same or different fiber active co