News

What does FC\ST\SC\LC\MTRJPC\APC\UPC stand for in optical fiber jumper?The FC, ST, SC, LC, and MTRJ physical interfaces are connected in different ways.FC is a circular spiral port.ST is a circular 45 degree bayonet.SC is a square socket. LC and MTRJ are small core connectors, which are used less in

How to check whether the optical fiber jumper is qualified With the insertion loss instrument, first use the light pen to measure whether the jumper is through light, and determine that the fiber is not broken. The general indicators of carrier-grade test are: insertion loss is less than 0.3dB, and

Classification of optical fiber jumpers Fiber jumper according to the different transmission media can be divided into common silicon-based fiber single-mode, multi-mode jumper, there are other fiber jumpers such as plastic as the transmission medium; According to the structure of the connector, it

Introduction to optical fiber jumpers Optical fiber jumper (also known as optical fiber connector) means that both ends of the optical cable are installed with connector plugs to achieve optical active connection; One end with a plug is called a fiber pigtail.Optical fiber jumper is used to connect

1.Different structure: butterfly fiber optic cable is a compact fiber optic cable, its appearance and shape show butterfly, generally consists of one or more fiber, filler and outer sheath; The leather fiber optic cable is a parallel structure of optical cable, composed of one or more optical fibers

WDM bearer schemes include coarse wavelength division multiplexing (CWDM), dense wavelength division multiplexing (DWDM), and medium wavelength division multiplexing (MWDM) and fine wavelength division multiplexing (LWDM).CWDM coarse wavelength division multiplexer CWDM (Coarse Wavelength Division M

There are a lot of people who don't understand the difference between WDM and optical splitter. Simply put, WDM is to separate the multiple wavelengths of light in the line to transmit separately, of course, can also be combined with multiple wavelengths of light transmission together; Splitter is

Advantages of WDM Large capacityAn important feature of WDM is that it can make full use of the bandwidth resource of optical fiber, and increase the data transmission capacity without changing the basic architecture of the existing network, so that the transmission capacity of a fiber can be increa

Wavelength division multiplexing (WDM) allows two or more wavelengths OF light to BE TRANSMITTED over DIFFERENT optical channels simultaneously in the same fiber. WDM (Wavelength Division Multiplexing) is two or more different wavelengths of optical carrier signals (carrying a variety of information

SC type fiber jumper (SC = Subscriber Cable). The joint is a standard square joint, using engineering plastics, with high temperature resistance, not easy to oxidation advantages. Generally, SC connector is used for the side optical interface of transmission equipment. Often used in general network,